Intel®
Server Board S875WP1-E has 4 DIMM sockets, which can hold up to
4 GB of Unbuffered ECC and non-ECC DDR266, DDR333 or DDR400
memory using four 72-bit DIMM modules. The following memory
features are supported:
- DDR266, DDR333 and DDR400 Unbuffered ECC and non-ECC
compatible 2.5V modules (in compliance with the DDR JEDEC DIMM
Specification).
- DIMMs with capacity of 128 MB, 256 MB, 512 MB, 1GB. Other
DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 128 MB using one 128 MB DIMM.
Note: This content is
updated frequently, so please refresh your browser to ensure
that you are downloading the most current version.
Caution: Third party memory vendors may use
the same module part number with different
DRAM vendors and die revisions. To insure proper system
operation, verify that each DRAM
vendor and die revision has been separately tested and
qualified. Please notify CMTL if there is a discrepancy.
Note: This list is not intended be
all-inclusive. It is provided as a convenience to Intel’s
general customer base, but Intel does not make any
representations or warranties whatsoever regarding the quality,
reliability, functionality, or compatibility of these memory
modules.
|
